NodeMCU - ESPlorer unable to use custom builds ESP8266 -


i have esp-01, esp8266, 8mb i'm able flash nodemcu_float_0.9.5 ok, , use esplorer on baud 9600. responds ok, i'm able connect , load innit files.

i tried use custom nodemcu firmware builder latest flasher tool, repeating same flashing process step above, flash successful esplorer cannot establish connection - acts baud rate not correct.(random symbols populating window) @ point have tried baud rates , firmware types (master, dev , frozen).

any advice?

here things can try.

completely erase flash e.g.

esptool.py --port /dev/ttyusb0 erase_flash

then flash custom firmware again e.g.

esptool.py --port /dev/ttyusb0 \ write_flash -fm dio 0x00000 nodemcu-master-18-modules-2017-03-27-08-03-59-float.bin

try different flash mode. instance dio, qio...

esptool.py --port /dev/ttyusb0 \ write_flash -fm qio 0x00000 nodemcu-master-18-modules-2017-03-27-08-03-59-float.bin

try different baud rates e.g. 115200 

i can't remember ever having used baud rate of 9600 on nodemcu.   esp8266 modules baud rate of 115200 worked.

some people have reported if using float firmware, flashing integer version of firmware helped getting rid of corrupt init.lua file. 

esptool.py --port /dev/ttyusb0 \ write_flash -fm dio 0x00000 nodemcu-master-18-modules-2017-03-27-08-03-59-integer.bin

note: make sure replace /dev/ttyusb0 com port


Comments

Post a Comment

Popular posts from this blog

Command prompt result in label. Python 2.7 -

i want put result(output) of shell command label. command works, label shows "0", however, in command prompt, result shown correctly, need showed in label. doing ubuntu. myg1 = button(root, text="rodyti informacija", command=lambda: gauti()) myg1.pack(side=bottom) def gauti(): imti = tekstas.get("1.0", "end-1c") info = subprocess.call("id '{imti}' ".format(imti=imti), shell=true) w = label(root, text= info) w.pack(side = bottom) subprocess.call() returns exit code of process created (in case 0 success). if want text output of process, should instead call subprocess.check_output() .
Read more

javascript - How do I use URL parameters to change link href on page? -

i change href value of link using url parameters. example: default <a id="dlink" href="link-1">link</a> but, when user goes https://url.com/?dlink=link-2 it swaps out link new link <a id="dlink" href="link-2">link</a> first need value url. if you're not using javascript framework can create function using jquery. please check get url parameter jquery or how query string values in js it. after that, element "a" id , set value there. $("#dlink").attr("href", hreffromparam);
Read more

amazon web services - AWS Route53 Trying To Get Site To Resolve To www -

so have domain nameservers pointed aws route 53. site hosted on ec2 instance , reachable resolves site.com, if input www.site.com. i'm curious how site resolve www.site.com. have under route53 domains hosted zone 2 additional record sets outside of ns , soa: a site.com ec2 elastic ip cname www.site.com ec2 public dns i can reach site using both site.com , www.site.com, resolve site.com. there way make if enter either, resolves www.site.com? at first, both should record set. a site.com ec2 elastic ip www.site.com ec2 elastic ip and need redirect setting in web server (nginx, apache, ..) following. (source: how redirect www non-www nginx on centos 7 ) redirect non-www www if want redirect users plain, non-www domain www domain, add server block: server { server_name example.com; return 301 $scheme://www.example.com$request_uri; } save , exit. configures nginx redirect requests "example.com" "www.example.com". not
Read more